五金镀铬油墨 五金表面镀铬油墨 

欧莱斯MPL系列油墨
特性：
MPL-A系列油墨是一款不需添加固化剂，不需烘烤的单组份高性能金属油墨，平光，慢干，具有良好的耐麻磨性，耐酒精。而且该油墨对各种漆面都具有相当好的附着力。
适用范围：
铝，铁，不锈钢等金属制品，电木，晒钢，PU漆面以及各种漆面
使用：
1.该系列油墨需自然挥发干燥，24小时实干，100摄氏度烘烤10分钟干燥
2.使用前请将油墨充分搅拌均匀,以防止油墨中添加的特效助剂可能产生分离现象
3.印刷前有必要可首先考虑除去印材表面的油渍及尘埃
4.请根据作业实际环境条件合理选取本公司之快、中、慢三种类型中的某种稀释剂
5.请根据希望印刷的实际效果，正确选取恰当网版：40T-140T
 
使用说明

2、胶 刮：建议使用70-85度聚氨酯胶刮
3、参考用量：300目网板印刷约为30㎡/㎏
4、选用溶剂：请选用我司配套的固化剂，因印刷环境温度、通用量及印刷图案大小不同进行适当选择
5、网板清洗：选用有机溶剂清洗（如：洗网水）
The rice MPL ink series
Characteristic：
MPL-A is a series of ink without adding curing agent, one component of high performance metallic ink, does not need to bake the plain, slow drying, hemp has good resistance to abrasion resistance, alcohol resistance. And the ink has good adhesion to various lacquer surfaces.
Scope of application:
Aluminum, iron, stainless steel and other metal products, bakelite, sun steel, paint and paint PU
Use：
1. this series of ink must be dried naturally, dry for 24 hours, drying at 100 degrees centigrade for 10 minutes
2. please stir well the ink well before use, so as to prevent the special effect additive added in the ink may produce the separation phenomenon.
3. before printing it is necessary to first consider the oil stains and dust on the surface of the printed material
4. please select some kind of diluent in three kinds of fast, medium and slow types of our company according to the actual conditions of the operation.
5. please select the appropriate web page according to the actual effect of hope printing: 40T-140T

Instructions

2. Scraping: it is recommended to use 70-85 degrees of polyurethane scraping
3, dosage: 300 mesh screen printing is about 30 kg / square meters
4, choose the solvent: please choose the curing agent of our company, suitable selection of the printing environment temperature, the general quantity and the size of the printing pattern.
[本信息来自于今日推荐网]