五金镀锌油墨 五金表面镀锌油墨 

概述:1. 适用范围:电镀、 铁、铝及铝氧化表面、不锈钢机烤漆等材料。 2. 油墨特性:固化后对极性底材具有优异的附着力,洗涤精、耐酒精效果好;墨层均匀,颜料分散性好,过网性、流平性良好,涂膜具有较高的
本信息已过期,发布者可在"已发商机"里点击"重发"。

刷新时间:
2024-01-15 10:54:46 点击55230次
服务区域:
江苏/苏州/昆山/张浦镇
价格:
  • 180 元/千克
联系电话:
18486349626 代莉
QQ:
3539716825
信用:4.0  隐性收费:4.0
描述:4.0  产品质量:4.0
物流:4.0  服务态度:4.0
默认4分 我要打分
1.適用範圍: 加硬PC、加硬PMMA、噴PU表面、噴UV漆表面、金屬、玻璃、電鍍、電泳、氧化鋁、電解板、鋁塑板、烤漆、噴塑、噴粉、氨基烘漆面、丙烯酸漆面、PA塑料尼龍、電木、玻纖、玻璃鋼、樹脂、密胺、三聚氰胺;
2.稀釋劑: S-003專用稀釋劑;
3.用量:用300目網版每公斤約可印30平方米;
4.固化劑:要加10%固化劑,TA-9或TAB-007兩種固化劑;
5.幹燥方法:自然揮發幹燥的, 墨層表幹時間5-10分鐘:實幹時間在24小時以內。
註意事項
  1、試印確認符合要求後再批量生產。
 2、做好被印物的表面清除油脂及雜質工作,以促進附著效果。
 3、需要套色時,應在前顏色表幹或硬幹後再進行套色工作。
 4、附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測,需要墨層
      完全固化後方可檢測。
 5、未經允許情況下,不得將本系列油墨與其它類型油墨混用及配色。
 6、添加固化劑後的使用時限:加入固化劑後的油墨使用時間為4-6小時,環境溫度越高使用時間越短,剩余油墨不可回收。
 7、油墨,稀釋劑使用及儲存時嚴禁煙火。
1. scope: harden PC, hard PMMA, PU, UV surface spray spray paint surface, metal, glass, electroplating, electrophoresis, alumina, electrolytic plate, aluminum plate, paint, spray, spray, paint, acrylic amino baking paint, PA plastic, nylon, bakelite, glass fiber, glass fiber, resin, melamine melamine;
2. diluent: S-003 special diluent;
3. dosage: the 300 mesh net plate can be printed about 30 square meters per kilogram.
4. curing agent: to add 10% curing agent, TA-9 or TAB-007 two kinds of curing agent;
5. drying method: natural volatilization drying, ink layer table dry time 5-10 minutes: dry time in 24 hours.
Precautions
1. The test print confirms the batch production after it meets the requirements.
2, do a good job of removing oil and impurities on the surface of the printed material to promote the attached effect.
3, need to register, should be before the color table dry or hard after the registration work.
4, attachment, hardness, acid resistance, oil resistance, oil resistance, scratch resistance, abrasion resistance and other properties, and the need for the ink layer
Complete curing can be detected in the rear.
5. In the absence of permission, this series of ink can not be mixed with other types of ink and color matching.
6, the time limit for adding the curing agent is: the time of using ink after adding the curing agent is 4-6 hours, the shorter the time of using the environmental temperature is, the remaining ink is not recyclable.
7. Ink, the use and storage of diluents strictly prohibit fireworks.
五金镀锌油墨 五金表面镀锌油墨
[本信息来自于今日推荐网]
  • ks888888发布的信息
  • 喷漆表面自干油墨,自干喷漆表面油墨
  • 高级自干油墨,漆膜坚硬、柔韧光亮丰满,保护性及遮盖力特佳,机械性强,颜色鲜艳持久 由多种改良耐候树脂组成,高品质,遮盖力强。优良的附着力及层间密着性,为涂装作了物理性能的良好基矗...
  • 塑胶电镀件表面移印油墨
  • ■ 主要特性 1)可耐多次酸性蚀刻。 2)退膜速度快,此特性可确保板材在退膜过程中免受碱液攻击。 3)固化后玻璃表面具有优良的附着力和抗划伤性。...
  • 塑胶电镀件表面丝印油墨
  • 1.特性:MPA系列是一款适合印刷在UV表面、真空镀表面、金属等光滑材质表面的丝、移英特耐磨溶剂型油墨; 2.适应范围: 特别适合印刷在UV表面、真空镀表面、金属等光滑材质表面。...
  • 五金镀镍油墨 五金表面镀镍油墨
  • 油墨特性:墨层光亮出现墨均匀,颜料分散性好,细度均匀,过网性流平性好,固化后对金属及其它物件表面各种涂层具有优异的附着力,涂膜具有高的硬度光泽及良好的耐水性,耐候性,耐油性,耐溶剂性,耐化学...
  • 五金镀铬油墨 五金表面镀铬油墨
  • 特性: 欧莱斯MPL-A系列油墨是一款不需添加固化剂,不需烘烤的单组份高性能金属油墨,平光,慢干,具有良好的耐麻磨性,耐酒精。而且该油墨对各种漆面都具有相当好的附着力。...
  • 金属镀锌油墨 金属表面镀锌油墨
  • 推荐用途:本产品主要用于各种金属(铁/铝/不锈钢/合金等片材型材制品)、玻璃、陶瓷、电镀面(真空电镀面/水电镀面等)、阳极氧化铝、静电喷漆面或烤漆面等制品的丝印或移樱 产品特性:哑光、附着力优...