1对10粉末中央供料系统 

1 on the 10 powder center feeding system 承蒙 your company's sense of love to! I would like to quote the following products, please refer to the reference and benefit to care, be grateful!
 1 on 10 centralized feeding system Technical parameters:
1, forming machine 10 2, the amount of material: 250kg / hour (total)
3, the farthest distance: 15 m 4, raw materials: 1 kinds of raw materials
5, the current number of planning: 10, 10 stations 6, the future expansion of the number: Taiwan, station
7, the system planning: a group of feed system 8, power equipment: 380V AC 50Hz
9, the total load: vacuum 7.5KW 10, the use of gas source: 0.5 ~ 0.7Mpa
The following are the same as the "
1 pair 10 powder central feeding system main control part:
NO Product Name Specification Quantity RMB Unit Price RMB Amount
1 suction host with dust SAL-10HP-10 1
1.PLC man-machine control, EV7 "color man-machine panel, easy to operate, can display the operation of the machine suction hopper
PLC process control, the circuit can control seven operating points, 7.5kw high pressure double fan, with dust removal device part.
2 Sampler with dust SAL-7.5HP station 1
1.PLC man-machine control, EV7 "color man-machine panel, easy to operate, can display the operation of the machine suction hopper
PLC process control, the circuit can control seven operating points, 5.5kw high pressure double fan, with dust removal device part.
3 cut off the valve HV-2 "11
Control pipeline single station wind pressure source
Cylinder using SNS, solenoid valve with SNS, the cylinder has a regulator control,
Adjustable air pressure, cylinder stroke speed, tracheal copper connector using PC08-2.
The internal use of wear-resistant high-temperature silicone plug as a valve, windshield valve barrel made of stainless steel,
Made of stainless steel.
4 windshield HV-2 "11
Control pipeline single station wind pressure source
Cylinder using SNS, solenoid valve with SNS, the cylinder has a regulator control,
Adjustable air pressure, cylinder stroke speed, tracheal copper connector using PC08-2.
The internal use of wear-resistant high-temperature silicone plug as a valve, windshield valve barrel made of stainless steel,
Made of stainless steel.
5 single tube evacuation device HF-2 "3
Installed in the bottom of the storage tank, used to empty the pipe, so that the plastic does not remain in the tube.
Cylinder using SNS, solenoid valve with SNS, the cylinder has a regulator control,
Adjustable air pressure, cylinder stroke speed.
The use of wear-resistant high-temperature silicone plug as a valve, cut off the valve barrel made of stainless steel, cut off the valve flange
Made of stainless steel.
6 storage box 2000kg 1
Made of stainless steel. Non-standard special, with casters casters, the bottom of the pumping.
7 suction powder hopper M-12L SUS 2 "10
M-30L SUS 2 "1
Vacuum hopper, stainless steel, installed in the injection molding machine and mixer and 1T of the silo
The following are the same as the "
1 on 10 powder Central feeding system Pipeline Engineering section:
The following are the same as the "
1 stainless steel elbow SUS 2 "/ 1.2mm (foot) 90 degrees 12
For the transport of materials, which will help solve the loss of raw materials in the transmission due to corner and plug the material pipe
2 tube clip 2 "36
For the stainless steel raw materials and negative pressure pipe in the middle of the connection, the internal installation of silicone ring to ensure that the pipeline airtight
3 support frame non-standard production of 10 groups
Support the pipeline and trunking
4 pairs of five sub-station 1X5 2
For the delivery of material distribution, one into five, stainless steel quick connector
5 stainless steel pipe SUS 2.0 "/ 1.2mm 28
For the delivery of materials and negative pressure pipeline laying
6 heat-resistant steel wire hose 2 "/ 51mm 2 rolls
The use of joint-licensing environmentally friendly tasteless transparent heat-resistant steel pipe, for negative pressure and the machine and dust collector, vacuum station, etc.
7 control signal cable 3C / 100M 2C / 100M 2 rolls
Using the national standard copper core line
For the windshield valve, vacuum hopper, micro-hopper signal control, the national standard copper wire
The following are the same as the "
1 on 10 powder central feeding system installation, hardware accessories:
The following are the same as the "
1 metal pipe fittings type 1
Tee, screw
2 trachea fitting type 1
Tee, trachea
3 construction installation fee 1
The following are the same as the "
The following are the same as the "
 1 on 10 powder central feeding system engineering total offer:
The following are the same as the "
1 on 10 powder Central feeding system Terms and Conditions:
1. Payment conditions: 40% deposit, 50% before shipment, 10% of the installation completed, I
2. Delivery period: 30 days after receipt of deposit
3. Delivery mode: the above quotation for the Wenzhou delivery price.
4. Packing: general packaging.
5. Customers to provide on-site lighting equipment, cooling water, utilities, elevators and power supply use
6. Acceptance for the completion of the operation within one month of delivery, warranty period of one year.
7. The above includes education and training.
8. The above price does not include tax, tax plus 17 points.集中供料系统
深圳市达安泰机械设备有限公司生产中央供料 电话：075581445855   传真：0755-88210189