成都>zzcjjx>供求信息

JK810一体式全液压露天潜孔钻机厂家价格 

JK810自动一体化全液压潜孔式钻机

JK810一体式全液压潜孔钻机更低的价格，更高的配置，是金科钻孔与阿特拉斯一体化解决方案具性价比的代表之作。

JK810一体式全液压潜孔钻机是一款可以为您带来更高自动化、更高钻进效率的产品，运行可靠，操作简单。标配有满足FOPS要求的驾驶室和自动换杆系统,加宽重型行走机构,在满足快速移动的同时兼顾更好的安全性，液压除尘系统可满足矿山的最新的环保要求，是现代绿色矿山开采的可靠解决方案。

回转机

双摆线马达回转装置，回转扭矩大、不容易卡钻，可以根据不同岩层调节回转速度，进口回转密封件封性好、寿命长。

Rotation unit

The equipped double cycloid motors can outputmassive torque and reduce possibility of pipe-stucksituation. And the rotation rate can be continuouslyadjusted according to different rock formations.            

Theimported seals for the rotation unit is with extraordinary performance and long service life.

驾驶室

全封闭笃室配置带冷暖空调FOPS达到欧美劳动保护标准，

全方位安全宽广清渐使得驾轻害对各个角度准确拿控题过400m的寓地可距，满足各种严苟路面通过要求，减少底盘碰撞可能。

Cabin

The sealed air conditioned cabin is made with Fopswhich meets EU and US safety protection standards.

The all-around large safety windows offer greatvisibility and help the operator control the rigprecisely from all angles.

The high ground clearance of over 400mm suitsvaneties of tough terrain and minimizes the possibility of collision with ground.

空压机

采用阿特拉斯原装两级压缩机系统，可提供20bar-18.5m3压缩气体强劲输出，性能可靠，适合于各种硬度岩石，实现更快进尺游力有余。

Air compressor

The high-output Atlas Copco air compressor featurestwo stages of compression, delivering pressure of20bar and FAD of 18.5m/ min  Powerful and reliable, itsuits rock formations of various hardness and offershigh penetration rate with ease.

自动接卸杆系统

储杆和自动接卸杆的功能操作简单，采用单个手柄就可以实现接杆收杆。机械手开合以及钻杆倒库的全部动作。

接卸杆用上下夹紧的方式便于松开钻杆接头，提高了工作效率。

Automatic pipe handling system

All the functions, such as pipe storage, pipe loading andunloading, movement of the mechanical clamps, can becontrolled very easily with one single joystick.

Loading and unloading of the drill pipes are easily achievedby upper and lower clamping, greatly raising the working.

操作系统

操作系统简洁友好，易于上手，钻机的工作运行参数、操示报警功能集中在仪表台上，便于操作者观察，各项数据一目了然，钻机的开孔角度，空压机的运行参数实时显示，方便操作者准确布孔，掌控全局。

Operation system

The operation system is simple and ergonomically friendly.

The rigs operating parameters, instructions and wamings allcan be clearly displayed on the dashboard, easy for the operator to monitor.

The real-time display of hole collaring angle and compres-or operating parameters help the operator drill holesrecisely and control the rig easily.

操纵台

操纵阀集中布置，采用大量手动直控液压操作系统，性能可靠，维修简单，便于钻机的各项操作控制。快速推进及提升操作，减少辅助时间，提高工效。推进力可调控制，根据钻进需要随时调节。

Control panel

The concentrated levers make the operation more easier.

The adoption of massive manual hydraulic operationsystems ensures reliable performance, simple operationand low maintenance cost. Fast feeding and liftingdecrease auxiliary time and increase working efficiency.

Feeding force can be adjusted anytime if needed.

发动机

采用国Ⅲ排放标准电喷涡轮增压水冷发动机，功率强大、省油；双级空气过滤系统保障入气清洁，大大降低发动机故障率

Engine

The water-cooled EFI turbo engine offers morepower, consumes less fuel and complies with the

National Ill emission standard. The two-stage airfilter system ensures intake of clean air and great-ly reduces the engine failure rate

除尘系统

高效全液压除尘器，带有滑动式捕尘罩。收尘效率高，性能稳定，有效的延长了钻机的使用寿命，保证作业人员的身体健康，环保效果好

Dust collecting system

The efficient hydraulic dust collector is equipped with a sliding dustcover. It boasts high dust collecting efficiency and stable perfor-mance, extends the rig s service life and ensures a clean workingenvironment for the operators.

底盘

采用工程机械四轮带底盘，结构强度好，加宽履带行走平稳，爬坡能力强，凿岩作业时更加平稳。

浮动式车架，前后浮动10°。行走高低双速可调，工地间转移快捷，

Undercarriage

The heavy-duty undercarriage features robust structural strength,wide tracks and excellent grade ability, which all ensure better stabili-ty while drilling.

The undercarriage can oscillate 10 back and forth, featuring adjustable dual speed and fast maneuverability between sites.

维护保养

维护保养便利，保养点和检查点触手可及，发动机舱布局合理，多个机罩门开合方便，使得保养和服务十分便捷。

Repair and maintenance

Maintenance and repair are very convenient thanks to that the maintenance and check points are easily accessible, engine compartmenwell organized, and all service doors can be easily opened and closed.

JK810全液压潜孔式钻机技术参数