深圳>srkfmm>供求信息

进口高温电磁阀（不锈钢/铜/超高温）美国斯克SRK 

进口高温电磁阀（不锈钢/铜/超高温）美国斯克SRK

SRK原装进口高温电磁阀总代理：深圳市鼎机阀门有限公司---电话：15817443889 手机：15817443889  QQ:1928728284  

进口SRK高温电磁阀（不锈钢/铜/超高温）系列,阀芯均为特殊耐高温、耐磨材料制作,特制线圈,超高温外采用散热的结构方式。

广泛应用于船舶重工、检测设备、加热设备、液压设备等高温导热系统中。

高温阀——t 大于450℃的电磁阀

中温阀—120℃小于 t 小于450℃的电磁阀

常温阀——40℃小于 t 小于120℃的电磁阀

Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK

SRK imported high-temperature solenoid valve distributor: Shenzhen Dingji Valve Co., Ltd. --- Tel: 15817443889 Mobile: 15817443889 QQ: 1928728284

Imported SRK high-temperature solenoid valve (stainless steel / copper / ultra-high temperature) series, the valve core are special high temperature, wear-resistant materials, special coil, ultra-high temperature outside the use of heat dissipation structure.

Widely used in ship heavy industry, testing equipment, heating equipment, hydraulic equipment and other high-temperature thermal systems.

High temperature valve - solenoid valve with t greater than 450°C

Medium temperature valve - 120 °C less than t less than 450 °C solenoid valve

Normal temperature valve - 40°C less than t solenoid valve less than 120°C

进口高温电磁阀（不锈钢/铜/超高温）美国斯克SRK

SRK不锈钢高温电磁阀

阀体、阀芯均为特殊耐高温、耐磨不锈钢材质制作,特制线圈,广具有防潮、**特性,选用螺纹或法兰连接方式,工作方式可选常开或常闭控制,

额定电压为 DC12~127V或AC36~380V,其他电压可定制,其性能稳定,可靠性极高。

SRK高温电磁阀技术参数：

控制方式：常开式、常闭式

动作方式：直动型，分步直动型,先导活塞型

标准电压：380,220,110,24VAC~220,110,24,12VDC

线圈工作温度：<+50℃、<+85℃

流通流体介质：水、气、油等高温流体

流通压力：0-1bar,10bar,16bar,25bar,40bar,64bar,100bar

流体温度：+100℃,+200℃,+300℃,+400℃,+500℃,+650℃

阀体材质：不锈钢（304、316、316L）、铸钢

连接方式：螺纹、法兰、焊接

泄 漏  量：零泄漏

产        地：美国

产品品牌：美国斯克（SRK）

Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK

SRK stainless steel high temperature solenoid valve

The valve body and the valve core are made of special high-temperature resistant, wear-resistant stainless steel materials, special coils, wide moisture-proof, ** characteristics, the choice of thread or flange connection, the work mode can be normally open or normally closed,

Rated voltage DC12 ~ 127V or AC36 ~ 380V, other voltage can be customized, its stable performance, high reliability.

SRK high temperature solenoid valve technical parameters:

Control method: normally open, normally closed

Action mode: direct-acting, step-by-step, pilot piston type

Standard voltage: 380,220,110,24VAC~220,110,24,12VDC

Coil operating temperature: <+50°C, <+85°C

Flow medium: high-temperature fluids such as water, gas, and oil

Pressure of circulation: 0-1bar, 10bar, 16bar, 25bar, 40bar, 64bar, 100bar

Fluid temperature: +100°C, +200°C, +300°C, +400°C, +500°C, +650°C

Body material: stainless steel (304, 316, 316L), cast steel

Connection method: thread, flange, welding

Leakage: Zero leakage

Origin: United States

Product Brand: SKK (SRK)

进口高温电磁阀（不锈钢/铜/超高温）美国斯克SRK

进口超高温电磁阀注解：1、流体中若含有杂质，电磁阀进端必须安装过滤阀（30——80目/寸），且无凝固及结晶现象。

                           2、电磁阀安装方位无限制。（S-水平安装、C-垂直安装）

                           3、反向压差时请在阀后安装止回阀。

                           4、以上参数根据工况要求进行选择。

Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK

Imported ultra-high temperature solenoid valve Note: 1, if the fluid contains impurities, the solenoid valve must be installed at the end of the filter valve (30 - 80 mesh / inch), and no solidification and crystallization.

                            2, solenoid valve installation position without limit. (S-horizontal, C-vertical)

                            3. Install a check valve behind the valve when there is a reverse pressure difference.