东营>qa313>供求信息

环保型 氟蛋白泡沫灭火剂 3%（FP、-16℃）--耐海水 6%（FP、 

该灭火剂为低倍数泡沫灭火剂，适用于各种低倍数泡沫产生器。可在醇类等水溶性物质表面形成一层聚合物胶膜，靠泡沬和胶膜的双重作用，迅速而有效地隔绝空气，将火盘息。 主要用于扑救醇、酯、醚、酮、有机酸等水溶性物质的火灾； 也可扑救石油及石油产品等非水溶性物质的火灾。广泛用于大 型化工企业、油田、油库、船舶、机库等固定灭火装置，也可用于消防车等移动灭火设备，对大面积油类火灾和固体火灾扑救。

混合比：

FP3%型与水的混合比为3:97

FP6%型与水的混合比为6:94

包装、运输及贮存要求：

8、产品包装为25Kg、50Kg、200Kg塑料桶，1000Kg吨桶。

b、 产品在运输、贮存期间不得混入其它化学品及其它类型的泡沫灭火剂。

c、 产品应存放在阴凉、干燥的库房内，防止曝晒，贮存的环境温度低于45℃,高于其最低使用温度。

d、 公司可为您配置耐寒型、耐海水型产品。

Overview:

The fire extinguishing agent is a low-fold foam fire extinguishing agent suitable for various low-fold foam generators. A layer of polymer film can be formed on the surface of water-soluble substances such as alcohols, and the double action of foam and film can quickly and effectively isolate the air and suffocate the fire.

It is mainly used to save fires from water-soluble substances such as alcohols, esters, ethers, ketones and organic acids. It can also save fires from water-insoluble substances such as petroleum and petroleum products. Widely used in large chemical enterprises, oil fields, dl depots, ships, hangars and other fixed fire-fighting devices, can also be used for fire-fighting vehicles and other mobile fire-fighting equipment, for large-area oil fires and sold fires.

mixing ratio:

The mixing ratio of FP3% to water is 3:97.

The mixing ratio of FP6% to water is 6:94

Packaging, transportation and storage requirements:

The product packaging is 25Kg, 50Kg, 200Kg plastic drum, 1000Kg ton barrel.

Products must not be mixed with other chemicate and other types of foam fire extinguishing agents during transportation and storage.

The product should be stored in a cool, dry warehouse to prevent exposure. The ambient temperature of storage is lower than 45*C. which Is higher than its minimum use temperature.

the company can prepare cokl-resistant and seawater-resistant products for you.