三聚氰胺木板油墨 

产品特点 施工简单，高耐磨性，品质稳定，
技术参数 1、外 观：粘稠液体，20000－60000cps/25℃。
2、丝 网：300－400目网版，丝印刮刀：70－75度聚氨酯刮刀。
3、辅助剂：稀释剂C-2 UV专用开油水,固化剂S-8。
4、干固条件：烘烤15-30分钟，或过流水拉后直接UV固化（能量要求800mj/cm2）。
5、用 量：35－40m2/Kg。
6、储存方法：本品应储存于避光容器内，避免受热和潮湿，储存期为半年，半年后性能若无变化可继续使用。
7、包装规格：1Kg/桶
施工程序 A、UV面/真空电镀UV面/PU面
  1、按照油墨：固化剂＝10：1（重量比）加入S-8固化剂并搅拌均匀。
  2、根据施工粘度要求加入适量稀释剂。
  3、印制完成后直接过流水线。
  4、UV固化（能量要求大于800-1200mj/cm2，EHT能量计）。
B、ABS/PC+ABS /PC/PMMA/HIPS等
  1、根据施工粘度要求加入适量稀释剂。
  2、印制完成后普通烤炉75℃烘烤15-30分钟。
  3、UV固化（能量要求大于800-1200mj/cm2，EHT能量计）。 
注意事项 1、使用前，应检查油墨是否与基材适应，基材表面处理程度，基材表面干净程度（是否有太多脱膜剂、离型剂、油渍），基材的柔韧性和刚性。
2、可用酒精擦拭去除灰尘、油渍、脱除脱膜剂和离型剂。
3、应试印确认后方可批量生产。
The features of the product are simple, high wear resistance and stable quality.
The technical parameters 1, appearance: viscous liquid, 2000060000cps/25 C.
2, screen: 300-400 mesh screen, silk screen scraper: 70-75 degree polyurethane scraper.
3, auxiliary agent: diluent C-2 UV special open oil, curing agent S-8.
4, dry solid conditions: baking for 15-30 minutes, or after running water to pull the direct UV curing (energy requirements 800mj/cm2).
5, dosage: 3540m2/Kg.
6, storage method: This product should be stored in the light avoidance container, avoid heat and humidity, the storage period of half a year, half a year after the performance if no change can continue to use.
7, package specification: 1Kg/ barrel
Construction procedure A, UV surface / vacuum electroplating UV surface /PU surface
1, according to the ink: the curing agent = 10:1 (weight ratio) added S-8 curing agent and stirred evenly.
2. Add appropriate diluent according to the requirement of construction viscosity.
3. After the printing is completed, the production line is directly over.
4, UV curing (energy requirement is greater than 800-1200mj/cm2, EHT energy meter).
B, ABS/PC+ABS /PC/PMMA/HIPS, etc.
1. Add appropriate diluent according to the requirement of construction viscosity.
2. Bake for 15-30 minutes at 75 C after the printing and completion of the oven.
3, UV curing (energy requirement is greater than 800-1200mj/cm2, EHT energy meter).
Precautions 1, before use, check whether the ink is compatible with the substrate, the degree of substrate surface treatment, the cleanliness of the substrate surface (whether there are too many film removal agents, release agents, oil stains), the flexibility and rigidity of the substrate.
2, using alcohol wiping to remove dust, oil stains, removal of film and deionization agent.[本信息来自于今日推荐网]