东莞>高合华塑胶-工程塑胶原料PA POM>供求信息

GS 二硫化钼内润滑 极好耐磨性的PA66 

尼龙GS二硫化钼内部润滑，添加剂：二硫化钼润滑剂。性能特点：尺寸稳定性好，摩擦系数低，强度好，刚性高，韧性好，耐化学腐蚀，耐疲劳性好，降噪，耐溶解性，耐刮擦性好，抗磨性好，耐热性高，耐油性，耐油脂性，自润滑性。阻燃性：HB。符合 ROHS 标准。用途：齿轮，阀门/阀门组件，抗磨条，套筒，止推垫圈，轴承。GS 改善了机械、热和轴承类型的性能。它是PA66和二硫化钼（MoS2）的组合，同时保持其基本的电气和化学性能。通过复合，尼龙被给予额外的润滑，允许在使用过程中部分润滑或无润滑。它还有利于显着提高润滑部件的使用寿命，是一种非常具有性价比的选择。与未填充的PA66相比，具有更高的抗磨性，减少表面摩擦，更高的强度和刚度，从而提高尺寸稳定性。

质量保障.原产原包
配送到厂.持续交付
塑料供应链.靠谱蒋志华
我们采取可查证系统化运作模式。
我们是热塑性工程塑料树脂的供应链服务商。

PA GS molybdenum disulfide internal lubrication, additive: molybdenum disulfide lubricant. Performance characteristics: Good dimensional stability, low friction coefficient, good strength, high rigidity, good toughness, chemical corrosion resistance, good fatigue resistance, noise reduction, solubility resistance, scratch resistance, good wear resistance, high heat resistance, oil resistance, grease resistance, self-lubricating. Flame retardancy: HB. ROHS compliance. Usage: gears, valve/valve components, wear strips, sleeves, thrust washers, bearings. GS improves the properties of mechanical, thermal, and bearing types. It is a combination of PA66 and molybdenum disulfide (MoS2), while maintaining its basic electrical and chemical properties. By compounding, the nylon is given additional lubrication, allowing for partial or no lubrication during use. It is also beneficial for significantly increasing the service life of lubricating components and is a very cost-effective choice. Providing higher wear resistance, reducing surface friction, higher strength and stiffness compared to unfilled PA66, improving dimensional stability.