HP8591EM频谱分析仪
概述:东莞精通电子有限公司
联系人:刘先生
手机:18676986680
QQ:891434127
公司邮箱:dglt2008@163.com
AD:东莞塘厦镇塘龙东路
本信息已过期,发布者可在"已发商机"里点击"重发"。
HP / Agilent 8591EM EMC Analyzer, 9 kHz to 1.8 GHz
The HP / Agilent 8591EM EMC Analyzer, 9 kHz to 1.8 GHz is a stand-alone, automated EMC precompliance analyzer that reduces the time it takes to find, measure and document radiated and conducted EMI emissions. With an upper frequency of 1.8 GHz, the 8591EM can perform precompliance tests on products with clock frequencies up to 108 MHz. The 8591 EM has two modes of operation: EMI analysis and spectrum analysis. With the press of a key, this analyzer converts from EMC analyzer to full-function spectrum analyzer for use in a wide variety of non-EMC applications.
Features
■Setup keys link predefined CISPR bands with correct video and CISPR resolution bandwidths
■Built-in amplitude correction automatically corrects for antenna, amplifier, and cable losses
■Limit-line displays simultaneously compare device signals with up to two regulatory limits and a specified measurement margin
■Predefined routines automatically measure all signals over a specified frequency range
■Measure, store, and report up to 239 signals automatically
Frequency Specifications
■Frequency Range: 9 kHz to 1.8 GHz
■Frequency Sweep Time: Span 0 Hz, >1 kHz: 20 μs to 100 s
■Resolution Bandwidths: 30 Hz to 3 MHz (1, 3, 10 sequence)
200 Hz, 9 kHz, 120 kHz and 1 MHz (6 dB) EMI bandwidths
■Video Bandwidth Range: 1 Hz to 1 MHz in 1, 3, 10 sequence
Amplitude Specifications
■Amplitude Range: Displayed average noise level to +137 dBμV
■Maximum Safe Input Level (Input attenuator set at ≥ 10 dB)
* Average Continuous Power: +30 dBm
* Peak Pulse Power: +30 dBm
* DC: 25 Vdc
•Displayed Average Noise Level: 400 kHz to 1 GHz 30 Hz RBW 1 kHz RBW
-23 dBμV -8 dBμV
■Frequency Response: 9 kHz to 1 GHz: ±1.5 dB
Input / Output
Front Panel Connectors
■Input: 50W type N
■Cal Output: 50W BNC -20 dBm 300 MHz
Rear Panel Connector
■Earphone: 1/8" monaural jack
■Interface: GPIB
■High Sweep In/Out: BNC, high TTL = sweep
■Aux Video Out: 50W BNC, 0-1 V
■Aux IF Output: 50W BNC, -10 to 60 DBM, 21.4MHz
■Ext. Trigger Input: BNC TTL levels, positive edge trigger
■Ext. Ref. In: 50W BNC, 10 MHz, -2 to +10 dBm
■10 MHz Ref. Output: 50W BNC, 10 MHz, 0 dBm
■Aux Interface: 9 pin "D" subminiature
■Monitor Out: 50W BNC, NTSC, 15.75 kHz, 60 Hz
Weight: 14.5 kg (32 lbs)[本信息来自于今日推荐网]
The HP / Agilent 8591EM EMC Analyzer, 9 kHz to 1.8 GHz is a stand-alone, automated EMC precompliance analyzer that reduces the time it takes to find, measure and document radiated and conducted EMI emissions. With an upper frequency of 1.8 GHz, the 8591EM can perform precompliance tests on products with clock frequencies up to 108 MHz. The 8591 EM has two modes of operation: EMI analysis and spectrum analysis. With the press of a key, this analyzer converts from EMC analyzer to full-function spectrum analyzer for use in a wide variety of non-EMC applications.
Features
■Setup keys link predefined CISPR bands with correct video and CISPR resolution bandwidths
■Built-in amplitude correction automatically corrects for antenna, amplifier, and cable losses
■Limit-line displays simultaneously compare device signals with up to two regulatory limits and a specified measurement margin
■Predefined routines automatically measure all signals over a specified frequency range
■Measure, store, and report up to 239 signals automatically
Frequency Specifications
■Frequency Range: 9 kHz to 1.8 GHz
■Frequency Sweep Time: Span 0 Hz, >1 kHz: 20 μs to 100 s
■Resolution Bandwidths: 30 Hz to 3 MHz (1, 3, 10 sequence)
200 Hz, 9 kHz, 120 kHz and 1 MHz (6 dB) EMI bandwidths
■Video Bandwidth Range: 1 Hz to 1 MHz in 1, 3, 10 sequence
Amplitude Specifications
■Amplitude Range: Displayed average noise level to +137 dBμV
■Maximum Safe Input Level (Input attenuator set at ≥ 10 dB)
* Average Continuous Power: +30 dBm
* Peak Pulse Power: +30 dBm
* DC: 25 Vdc
•Displayed Average Noise Level: 400 kHz to 1 GHz 30 Hz RBW 1 kHz RBW
-23 dBμV -8 dBμV
■Frequency Response: 9 kHz to 1 GHz: ±1.5 dB
Input / Output
Front Panel Connectors
■Input: 50W type N
■Cal Output: 50W BNC -20 dBm 300 MHz
Rear Panel Connector
■Earphone: 1/8" monaural jack
■Interface: GPIB
■High Sweep In/Out: BNC, high TTL = sweep
■Aux Video Out: 50W BNC, 0-1 V
■Aux IF Output: 50W BNC, -10 to 60 DBM, 21.4MHz
■Ext. Trigger Input: BNC TTL levels, positive edge trigger
■Ext. Ref. In: 50W BNC, 10 MHz, -2 to +10 dBm
■10 MHz Ref. Output: 50W BNC, 10 MHz, 0 dBm
■Aux Interface: 9 pin "D" subminiature
■Monitor Out: 50W BNC, NTSC, 15.75 kHz, 60 Hz
Weight: 14.5 kg (32 lbs)[本信息来自于今日推荐网]
- dglt20008发布的信息
- KEITHLEY 2700台式多用电表+数据采集
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
- ANRITSU MS2721A手持频谱
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
- ONO SOKKI CF5220低频频谱分析仪
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
- QUANTUMDATA 882E数字TV信号发生器
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
- HP8648C信号源
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
- SHIBASOKU TG39AC全制式信号发生器
- 东莞精通电子有限公司 联系人:刘先生 手机:18676986680 QQ:891434127 公司邮箱:dglt2008@163.com AD:东莞塘厦镇塘龙东路...
重发信息
- 供应二手储罐,二手不锈钢储罐批发厂家
- <萌卖精品>承德二手小叉车|郑州二手2吨铲车出售
- 回收华为TN12C1CFPT51 TN11C1CFPT5U TN11C1CFPT5G TN12C1CFPA51
- 转让3.5x6米二手球磨机,保养好,低价转让
- Anritsu S332E 供应 闲置 S332E
- TDS3054B 热卖 TDS3054B 数字示波器
- 上海二手网络分析仪回收N5230C
- 无锡发电机回收二手发电机回收进口发电机高价回收
- 昆山厨房设备回收
- 处理2021年博瑞特6吨13公斤燃气蒸汽锅炉
- 无锡常州变压器回收===泰兴泰州变压器回收
- 齐哈一机产2.5米立车
- 大宇142千瓦发电机
- 变压器回收 常熟变压器回收 苏州二手变压器回收
- 西安废旧资源回收,废旧设备回收,工业设备回收,电子设备回