美国CIRS CT PMMA 007 DOSE Phantom CT模体
概述:深圳湾边贸易美国CIRS CT PMMA 007 DOSE Phantom CT模体价格优惠
本信息已过期,发布者可在"已发商机"里点击"重发"。
深圳湾边贸易美国CIRS CT PMMA 007 DOSE Phantom CT模体价格优惠 CIRS CT模体价格优惠 MODEL 007 007A价格优惠。
厂家:美国Computerized Imaging Reference Systems, Incorporated (美国CIRS)
 
For all computed tomography systems, the Food and Drug Administration recommends measuring the CT Dose Index (CTDI). Each section of the CIRS CT Dose Phantoms can provide separate dose information.  The user can also measure maximum, minimum and mid-range values of the nominal tomographic section thickness when performing dose profile measurements.
Each phantom consists of a set of nesting 15 cm thick solid PMMA disks measuring 16 cm (head) and 32 cm (body) in diameter.  The adult head disk is also suitable for pediatric body measurements. The Model 007A includes a third nesting disk measuring 10 cm in diameter for pediatric head measurements. Handles on the body and head are provided for ease in handling and maneuverability.
Through holes measuring 1.31 cm in diameter will accommodate standard CT probes. Acrylic rods are provided to plug the holes when not in use. The acrylic rods are machined to receive 1 mm diameter TLD rods.
The Model 007 & 007A are manufactured to comply with the FDA’s performance standard, 21 CFR 1020.33 that details the measurement requirements.
Features:
Abdominal, Adult Head, Pediatric Head configurations
PMMA disks and plugs with density of 1.10 g/cc
1.31 cm diameter holes sized for standard CT Dose probes
Nesting PMMA disks minimize storage space
Compatiblewith all CT scanners
An optional Support Bracket, Model 007-01, can be used to suspend the CT Dose Phantoms above the imaging couch and align it along the axis of X-ray tube rotation.  This enables the phantom to be used to assess CT dose in helical mode or any mode that requires the extended travel of the imaging couch or a wide beam.  This set-up might be used to address the dosimetry approach described in TG111.  An additional application of the support bracket is to provide a body to simulate continous scatter radiation from the patient during helical CT for dose safety measurements inside and outside the exam room. 
 
MODEL 007
 
Overall Dimensions
31.8 cm x 31.8 cm x 15 cm  (12.5 x 12.5 x 5.5)   
 
       
Weight
13 kg  (29 lb)
 
Materials
PMMA
Model 007 Includes     
(1) Abdominal Cylinder
(1) Adult Head Cylinder
(9) Acrylic Rods
(1) Foam Lined Carry Case
 
 [本信息来自于今日推荐网]
厂家:美国Computerized Imaging Reference Systems, Incorporated (美国CIRS)
 
For all computed tomography systems, the Food and Drug Administration recommends measuring the CT Dose Index (CTDI). Each section of the CIRS CT Dose Phantoms can provide separate dose information.  The user can also measure maximum, minimum and mid-range values of the nominal tomographic section thickness when performing dose profile measurements.
Each phantom consists of a set of nesting 15 cm thick solid PMMA disks measuring 16 cm (head) and 32 cm (body) in diameter.  The adult head disk is also suitable for pediatric body measurements. The Model 007A includes a third nesting disk measuring 10 cm in diameter for pediatric head measurements. Handles on the body and head are provided for ease in handling and maneuverability.
Through holes measuring 1.31 cm in diameter will accommodate standard CT probes. Acrylic rods are provided to plug the holes when not in use. The acrylic rods are machined to receive 1 mm diameter TLD rods.
The Model 007 & 007A are manufactured to comply with the FDA’s performance standard, 21 CFR 1020.33 that details the measurement requirements.
Features:
Abdominal, Adult Head, Pediatric Head configurations
PMMA disks and plugs with density of 1.10 g/cc
1.31 cm diameter holes sized for standard CT Dose probes
Nesting PMMA disks minimize storage space
Compatiblewith all CT scanners
An optional Support Bracket, Model 007-01, can be used to suspend the CT Dose Phantoms above the imaging couch and align it along the axis of X-ray tube rotation.  This enables the phantom to be used to assess CT dose in helical mode or any mode that requires the extended travel of the imaging couch or a wide beam.  This set-up might be used to address the dosimetry approach described in TG111.  An additional application of the support bracket is to provide a body to simulate continous scatter radiation from the patient during helical CT for dose safety measurements inside and outside the exam room. 
 
MODEL 007
 
Overall Dimensions
31.8 cm x 31.8 cm x 15 cm  (12.5 x 12.5 x 5.5)   
 
       
Weight
13 kg  (29 lb)
 
Materials
PMMA
Model 007 Includes     
(1) Abdominal Cylinder
(1) Adult Head Cylinder
(9) Acrylic Rods
(1) Foam Lined Carry Case
 
 [本信息来自于今日推荐网]
- coastaltrading发布的信息
- 美国CIRS 052A 乳腺模体
- 深圳湾边贸易代理进口美国CIRS 052A 乳腺模体,价格优惠!...
- 美国进口Magphan SMR170 模体
- 深圳湾边贸易原装美国进口Magphan SMR170 模体价格优惠!...
- Liqui-Phi Phantom MRI躯干模体
- 深圳湾边贸易代理进口Liqui-Phi Phantom MRI躯干模体价格优惠!...
- PLATON Flostat MN系列自动流量控制器MNAS12
- 深圳市湾边贸易有限公司优势供应法国PLATON流量控制器,Flostat MN系列自动流量控制器MNAS12...
- Flow Network DRS-9180-N5-L342 涡轮流量传感器
- 湾边贸易优势供应Flow Network DRS-9180-N5-L342 涡轮流量传感器...
- HI-Q过滤纸空气过滤 FP5211-20
- 深圳湾边贸易美国进口HI-Q过滤纸空气过滤 FP5211-20...