SURFACE STRESS METER
概述:The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth wi
本信息已过期,发布者可在"已发商机"里点击"重发"。
SURFACE STRESS METER FOR TEMPERED GLASS(REF.ASM-100-3)
The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth will be tested through photoelastic principle.Computer equipped will be used to reduce measurement error caused by operator and also be available for data management.In addition,automatic titrator and thickness gauge are in option to achieve efficiency improvement.
FEATURES
■peculiar Measurement Principle-Photoelastic Analysis Refractormeter
■automated testing reducing errors caused by operators
■computer to save data for quality control
■manual testing available when samples are not in good tempered condition
■LED lamp with 10000 hours serving time
■Master Piece to achieve system self-calibration.
■automated determination of qualified or unqualified according to operators’ setting while continuous testing in progress
■data saved and testing times displayed immediately while continuous testing in progress
■single and manual measurement in option
■automated Immersion Drop Function controlled by specific software to reduce Immersion liquid cost
SPECIFICATIONS
Stress Measurement Range(Mpa): 1-1000
Stress Measurement Accuracy(Mpa): ±20
Depth Measurement Range(μm): 0-200
Depth Measurement Accuracy(μm): ±5μm
Measurement Object: chemically and physically tempered glass
Measurement area(mm): ≥12*7
Measurement principle: Photoelastic Analysis by Refractormeter
Source of Light: special LED(with wavelength 590nm±10)
IR of Prism: 1.72
PC: special OS & software(installed)
Software: special software ASM-100-3
Power: AC220V 3A
Air Source(Mpa): 1(clean air)
Weight(Measuring Head)(Kg): about 14
LIST
■Measuring Head: 1 set (ASM-100-3)
■Prism(12*7mm): 1 set (installed on Measuring Head)
■Computer(DELL): 1 set
■Dongle: 1 set (inserted in computer)
■ASM Measurement software: 1 set (installed on computer)
■Immersion Liquid: 20ml
■Master Piece: 1 set
■XP OS
■Manual: 1 set in Chinese Version
■Liquid Titrition: 1 set
[本信息来自于今日推荐网]
The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth will be tested through photoelastic principle.Computer equipped will be used to reduce measurement error caused by operator and also be available for data management.In addition,automatic titrator and thickness gauge are in option to achieve efficiency improvement.
FEATURES
■peculiar Measurement Principle-Photoelastic Analysis Refractormeter
■automated testing reducing errors caused by operators
■computer to save data for quality control
■manual testing available when samples are not in good tempered condition
■LED lamp with 10000 hours serving time
■Master Piece to achieve system self-calibration.
■automated determination of qualified or unqualified according to operators’ setting while continuous testing in progress
■data saved and testing times displayed immediately while continuous testing in progress
■single and manual measurement in option
■automated Immersion Drop Function controlled by specific software to reduce Immersion liquid cost
SPECIFICATIONS
Stress Measurement Range(Mpa): 1-1000
Stress Measurement Accuracy(Mpa): ±20
Depth Measurement Range(μm): 0-200
Depth Measurement Accuracy(μm): ±5μm
Measurement Object: chemically and physically tempered glass
Measurement area(mm): ≥12*7
Measurement principle: Photoelastic Analysis by Refractormeter
Source of Light: special LED(with wavelength 590nm±10)
IR of Prism: 1.72
PC: special OS & software(installed)
Software: special software ASM-100-3
Power: AC220V 3A
Air Source(Mpa): 1(clean air)
Weight(Measuring Head)(Kg): about 14
LIST
■Measuring Head: 1 set (ASM-100-3)
■Prism(12*7mm): 1 set (installed on Measuring Head)
■Computer(DELL): 1 set
■Dongle: 1 set (inserted in computer)
■ASM Measurement software: 1 set (installed on computer)
■Immersion Liquid: 20ml
■Master Piece: 1 set
■XP OS
■Manual: 1 set in Chinese Version
■Liquid Titrition: 1 set
[本信息来自于今日推荐网]
- ptc0426发布的信息
- 偏光片吸收轴量测仪OI-OAM
- 偏光膜光轴测量仪是一款专门测量偏光膜吸收轴角度的仪器。测试时采用手动放置偏光膜的方式,可对偏光膜吸收轴角度进行单次测量和多次连续测量,并实时显示测量结果。并可保存可保存大量测试数据,具备数据查询,光轴角度分布分析、数据报表导出等功能。...
- 玻璃强化应力检测仪标准片S-701
- 只适用于应力仪分析滤波器的光迟缓旋转度和光源需要知晓的情况 检测光迟缓率是独立于使用的光的波长之外的....
- 塑料光盘退火应力检测仪S-600
- 该款双折射应力仪可以用光双折射法快速准确的检测出未经加工的透明光盘。 该款仪器使用方便,测量速度快,并且方便携带。 钠灯和白光灯放置于有风扇冷却装置的灯箱内。 该款仪器测量精度为±1.6NM 使...
- ptc-413定量应力仪
- 应力仪PTC-413 适用范围:适合于检测灯等有复杂构造的产品,检测高密度的塑料产品,如隐形眼镜等。检测光学晶体,如氟化钙等。 型号 PTC-413 尺寸 W280×D375×H410mm 重量 10Kg 测样有效长度 W200×...
- 塑料定量应力检测仪PA-100
- PA100的主要性能 1.应力图像的分布 应力竖轴方向等大范围内的应力分布, 可以通过图像来保存 2.应力的表格显示 任意两点之间的双折射的图像分布, 可以通过表格形式进行保存 3.范围分析 任意四角或...
- 玻璃二次元尺寸测量仪PDSM-2
- PDSM-2快速二次元通过显微放大原理进行高精度、快速的平面工件尺寸测量。通过适当增减相机的数量,可以对平面工件的关键特征点之间的平面位置关系进行精密测量。同时,使用计算机进行数据测量,便于测量数...